Selected structure
CUSTOM MICROFLUIDIC CHIP DESIGN & MANUFACTURING
Let your experiment lead.
We’ll design the chip.
Choose a standard platform or build your flow path. Start with a system ready for your laboratory syringe pump.
Discuss your project ↗CHANNEL STUDIO
Build your flow path.
Merge your inlets, add structures, then distribute to outlets.
QUICK START
Choose a starting point and adjust every detail. Selecting one replaces your current design.
Inlets 3
Outlets 1
Flow-path structures
Select a branch or structure in the drawing to open its settings.
TOP VIEW / GEOMETRY PREVIEWCHANNEL STUDIO
DESIGN SUMMARY
Discuss this design by email ↗Moving markers indicate the defined inlet-to-outlet direction only; velocity, mixing and flow distribution are not calculated.
Positive angles place branches above the centerline; negative angles place them below. Branches with equal angles may overlap.
Channel width and height start at 100 µm. Inlet and outlet ports can be adapted to your existing connection system.
This tool provides a geometric preview. Preliminary checks cover the footprint, branch overlaps and channel proximity; they do not validate every intersection or flow behavior. The final design is reviewed before manufacturing.
PLATFORM LIBRARY
Choose a starting point.
PLATFORM / 01PDMS + GLASS
PLATFORM / 02PDMS + GLASS
Hydrodynamic Flow Focusing
Adapt the inlet channels and focusing region to your experiment.
Explore platform ↗PLATFORM / 03PDMS + GLASS
Passive Micromixer Chips
Develop your mixing process through channel paths and turns.
Explore platform ↗PLATFORM / 04PDMS + GLASS
Gradient Generator Chips
Branched channel networks for a target concentration profile.
Explore platform ↗PLATFORM / 05PDMS + GLASS
＋
FULL CUSTOM DESIGN
A different design in mind?
Email your application requirements or your own drawing.
Let’s develop it together ↗Drawings are schematic. Manufacturing dimensions and tolerances are defined during technical review.
READY FOR YOUR SYRINGE PUMP
Your design.
Standard system components.
01Your selected chip+02Tubing & Luer connectors+03Connection accessories+04Setup & priming guide
Inlet and outlet ports can be optimized for your existing setup. Syringe pump not included.
YOUR EXPERIMENT. YOUR DESIGN.
A standard platform.
A new possibility.
From channel dimensions to new flow paths, let’s define the scope your experiment needs.
Discuss your design ↗01
Adapt a platform
Request changes to dimensions, junction geometry and port layout.
02
Describe your application
Define the flow path together, starting from your experimental objective.
03
Share your drawing
Email your CAD or DXF file for assessment.
Geometry changes may require new masks/masters. Scope and cost are agreed before production.
HOW WE WORK
A process planned together.
- 01
Share your requirements
Application, fluids, target dimensions and any existing drawing.
- 02
Define the design
Agree geometry, manufacturability and quotation scope.
- 03
Production & delivery
Prepare the approved design with standard system components.
LET’S TALK SCIENCE
Let’s start with an email.
Share your research question, analysis or manufacturing requirements. Attach drawings and relevant files to your email.
DIRECT CONTACTbiomicscience@gmail.comÜniversiteler Mah. 1596 Cad. Teknokent Kuluçka Merkez Binası No: 6 C, Unit 11, Çankaya / Ankara, Türkiye